Level Measuring Device using #esp32

У вашего броузера проблема в совместимости с HTML5

In this project, the accelerometer’s x, y, and z-axis data are read and used to calculate the roll and pitch angles. The atan2 function is used to convert the accelerometer data to angles in degrees.

Steps to make this project:

1. Put the esp32 on breadboard
2. Connect the OLED SDA and SCL pins to D21 and D22 of ESP32 respectively and VCC Gnd to +3.3V and Gnd respectively.
3. Connect the ADXL345 SDA and SCL also to D21 and D22 respectively and VCC and GND to 3.3 V and GND respectively.
4 Upload the code. (Pinned in the comments)

#esp32project #iot #shortsvideo #coding