Experimenting with EMS VCS3 MkII

Experimenting and discovering new and different sounds on an EMS VCS3 mkII synthi. The rhythmical pattern is created with the noise generator into envelope section. The "Off" control is round at about 1, so the envelope section is opening and closing very quickly. Osc 1 is then set relatively low creating a "click" sound that I managed to tune/sync with the envelope section so it happens once every three times the envelope opens. Osc 3 is controlling the filter frequency. By adjusting the response, it self oscillates to create some nice effects/sounds. The square wave of osc3 is controlling the reverb mix. The outputs of the reverb mix are fed to the the main outputs separately which lets it feedback on itself which can be adjusted with the level/mix controls. Osc 2 is controlled by the DK2 keyboard, set to cv and is fed into input 1 of the synthi. The input amplifier had to be adjusted to tune the keyboard! At 0, every note on the keyboard sounds the same pitch and at 100 the intervals between each key are much greater than a semitone! The range of the keyboard can then be adjusted with the oscillator control. - And this only makes it mono phonic! The whole process can be done again with a second input amplifier and another oscillator. More practice is needed on that one at present as it takes me about half an hour to set that up! Thanks for your interest