настройка контроллера кнопок руля cir-309U

Базовая настройка контроллера кнопок руля CIR-309U . Base programming steering wheel interface CIR-310U/CIR-309U Steering wheel interface CIR-309U is the interface between the resistive matrix of car wheel buttons and commands to be performed by an external device under their control. In addition, the device has a digital input data, due to which commands can be transferred from any other compatible device, for example, the controller CAN bus. Advantages: • Suitable for resistive matrix of any type; • Auto-tuning of the input circuits in accordance with type of resistive matrix; • Two independent inputs for connecting left and right groups of buttons; • Input of digital control makes controller usage universal; • Memory (with remote), with subsequent presentation, up to 32 commands; • 8 independent outputs, 2 of which provide additional functions; • Integrated current source provides a connection of diode emitters without need of additional resistors installation; • Possibility of programming commands of resistive control panels such as joystick for such brands as Sony and Pioneer; • Convenient parameter setting by computer; • Programming the carrier frequency for each of the infrared outputs. This provides maximum signal / noise ratio, that ensures maximum quality of multimedia device control; • Ability to memorize the entire configuration and infrared codes separately, in any medium, for example, in hard disk; • Absolute inertness to erroneous wiring of the voltage or power to any of the inputs; • Low power consumption; • Small size 64 x 49 x18mm. (2.48 x 1.89 x 0.69inches). Using the CIR-309U "multihelm" can be arranged, i.e. using the buttons on the helm you are able to control radio, DVD, TV, amplifier, speaker unit, siren etc.