PVC/Rubber Smartphone Universal ScopeCAM Build 2.0

STKO Amazon page: https://www.amazon.com/shop/shoottokilloutdoors TOOLS USED: -Drill, 1/8th drill bit, 3/4" Step bit, Phillips bit -Tape Measure, Straight Edge Torpedo Level, Black Marker, Pick -Bench Grinder, Saw, hand Grinder - (2) C Clamps , 1x6 wood Material Used: - (2) 1.5" SCH40 PVC 5.75" sections - (1) 1.25" x .75" PVC slip/thread bushing - (1) 1.25" x 1.25" rubber hose clamp connector - (3) 1/4 - 20 x 1" bolts - (3) 1/4 - 20 wing nuts - (2) flathead drywall screw x 1.5" long Steps: 1. Cut 1.5" pvc into (2) 5.75" sections 2. Cut through wall end to end 3. cook in oven at 400F for approx. 5mins check until flimsy 4. flatten pvc (HOTTT!!!) with c clamp and 1x6 wood 5. mark center/ draw centerline across length (hotdog style) 6. mark center across pvc bushing 7. align centerlines of pvc sheet and bushing (position of camera) 8. find/mark center hole of bushing with pick 9. drill 3/4" hole 10. mark/drill 2 equal spaced holes from center of bushing edges 11. screw in drywall screws flush 12.align phone camera to center hole, draw outline of phone 13. mark 3 holes 1/2" from phone outline 14. align pvc sheets, repeat 13 15. install/tighten bolts & wingnuts 16. mark/cutout for phone screen 17. mark/cut excess material 18. taaaa....daaa