Strange Double Bass Foot Technique explained!

My Double Bass Drum Pedal (US): http://www.amazon.com/dp/B001U7RQBS/?tag=hbbe-wg-20 My Double Bass Drum Pedal (Europe): https://www.thomann.de/de/pearl_p3002d_demon_doppel_pedal.htm?offid=1&affid=241 Facebook: https://www.facebook.com/NechtanDrummer Instagram: https://www.instagram.com/wanjanechtangroeger My Drumsticks (US): http://www.amazon.com/dp/B00C7J42YC/?tag=hbbe-wg-20 My Drumsticks (Europe): https://www.thomann.de/de/vic_firth_cmn_american_classic_hickory.htm?offid=1&affid=241 Finally a video that explains the mysterious foot technique that many have asked about. If you have a question, leave a comment. There also is a new video online about blast beats (up to 280bpm!): https://www.youtube.com/watch?v=2RlqvRcbl_4 Also check out my brothers artist page: http://www.artists.de/Micha_Bela_Groeger.html In this video I do not use triggers, its all just the sound from the camera microphone. I use a Pearl Demon Drive double pedal. My pedal settings: - spring tension is on maximum - footboard is on the longboard position - direct drive adjustment is on position "H" (heavy feel) - beater holder is on position "B" (power) - footboard angle adjustment is a little bit lower than the initial setting (about 1mm on the gauge) - beater angle is on initial setting - distance between beater holder and center of the beater head is about 13.5cm - I use Sonor beaters and with all this settings the distance between beater and drumhead is about 13cm If the Demon Drive is not your first pedal I would highly recommand to put the settings as close as possible to how your old pedal was set up. If the Demon Drive IS your first pedal I would recommand to start with lower spring tension and greater distance between beater and head. I hope I didnt miss something! If you need an English manual to understand everything you can get it here: http://www.pearleurope.com/upl/1/default/doc/P-3000D_manual.pdf